TOX PRESSOTECHNIK
MY: +60 3 80231448

Clinching Process Monitoring

Detailed Information for High Quality Clinching

  • Visualising a clinching-process

The process monitoring CEP 400T has been specifically designed for the TOX®-Joining process. The CEP 400T helps you to monitor and document all quality parameters related to the TOX®-Clinching process.

Force sensors measure the press force during the joining process. A position sensor monitors the cylinder travel to achieve the quality control dimension "X". Once the position sensor signals that the dimension "X" has been reached (bottom end position), then the measured force values are compared to the nominal values. The TOX®-Joint is OK when the measured force value falls within the preset force range. The resulting bottom thickness "X" is proportional to the shear and pull strengths of the joint, as long as the joining parameters and expected tool life are observed and maintained.

TOX®-Clinching Monitor CEP 400T

The clinching monitor with touch display. Available with 1, 2, 4, 8  or 12 channels for monitoring several proceses simultaneously.

Functions of the CEP 400T

  • Color touchscreen
  • Versions with 1 / 2 / 4 / 8 / 12 channels
  • Individual evaluation with 1-/2 channel versions
  • Real names for program memory, up to 40 characters
  • 64 sensor configurations per channel
  • 4 password levels: operator, setup technician, integrator, manufacturer
  • 16 digital inputs and 8 digital outputs
  • Status indicator menu of digital I/O ports
  • Stores up to 1000 values with time stamp
  • Includes TOX®softWare for parameterization and data recording
  • Choice of panel mount unit or wall mount unit IP54
  • Ethernet interface
  • Provides important information about the process sequence
  • Special monitoring by means of window technology for clinching processes
  • Individual measuring programs available
  • Storage of final values

Optional features

  • Field bus interfaces of all common bus systems*
  • Process sequence control for TOX®-Clinching Processes
  • Service modules such as
    • Remote maintenance
    • Test control unit to check measuring chain
  • Analog output 0 – 10 V
  • Evaluation unit for bench top presses TOX®-FinePress
  • Display of control dimension X (absolute value)

*With field bus connection, individual evaluation IO/NIO and end values are displayed, independent of the number of measuring channels in the device.

BROCHURES & DATA SHEETS

Data sheet 100.20: Process monitoring
Close
Process monitoring for clinching and joining processes

ALL BROCHURES & DATA SHEETS

Go to downloads

Applications

Clinching
Clinching is a cold-forming process that allows sheet metal and other materials to be fastened together without the need for bolts, rivets, or adhesives.
Read more
ClinchingClinching
Pressing
There are lots of application possibilities for the TOX®-Tongs, pressframes and presses
Read more
PressingPressing
Assembling
Pressing-in and mounting of bushings and bearings, production of precise force-fitting assemblies
Read more
AssemblingAssembling
Fastener insertion
Complete system solutions for the insertion of function elements
Read more
InsertingInserting
Coining
You have to identify your products? You need to hold a part safely for additional work?
Read more
CoiningCoining
Riveting
We offer you standardized but highly flexible products for riveting, crimping, flaring...
Read more
RivetingRiveting
Punching
It does not matter whether you want to process sheet metal, plastics, cardboard, textiles or foils
Read more
PunchingPunching

Address

TOX® PRESSOTECHNIK Sdn Bhd
Lot 834, Persiaran Subang
47600 Subang Jaya, Selangor
Phone: +60 3 80231448
Fax: +60 3 80235448
Contact
MY: +60 3 80231448 Contact form
©TOX® PRESSOTECHNIK GmbH & Co.KG
 
Cookie Information

We use cookies to give you the best possible experience when using our website. You can block or regulate the use of cookies by adjusting your browser settings accordingly.